LumberJocks

router table extension for my table saw

  • Advertise with us
Project by eddy posted 12-21-2011 02:51 PM 3117 views 14 times favorited 8 comments Add to Favorites Watch

made this form parts form a local wood and supply store
wood was a prelaminated mdf. the t-tracks and miter are incra and the insert is the 1 you
can pick up at MLCS. all in all have a little less than $100.00 in it made it 27X27. i allreay had the fence
it is the rockler sells. havent used it yet but i am sure it will be better than what i had.
thanks for looking all coments welcome

-- self proclaimed copycat





8 comments so far

View Viking's profile

Viking

857 posts in 1881 days


#1 posted 12-21-2011 02:57 PM

Eddy;

Well done. If this is your first router table you will surprise yourself in how much you will use it.

Thanks for sharing.

Good Luck!

-- Rick Gustafson - Lost Creek Ranch - Colorado County, Texas

View Roger's profile

Roger

14847 posts in 1490 days


#2 posted 12-21-2011 03:41 PM

very nice. you’ll really like it.

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

View Kindlingmaker's profile

Kindlingmaker

2654 posts in 2212 days


#3 posted 12-21-2011 04:24 PM

Looks great my friend! Be safe and have a great holiday!

-- Never board, always knotty, lots of growth rings

View Jorge Velez's profile

Jorge Velez

342 posts in 1272 days


#4 posted 12-22-2011 10:28 PM

I’m in the process of making one my self the same, bolt on my table saw, I also have a Craftsman table saw.

-- Jorge Velez, Guadalajara, Mexico.

View Paden501's profile

Paden501

35 posts in 1036 days


#5 posted 12-24-2011 06:04 AM

Wow very nice. I really love this idea.

View eddy's profile

eddy

928 posts in 2050 days


#6 posted 12-25-2011 12:01 AM

rick this is my 2nd table me first was a piece of corian counter top with a hole in it this will be so muck better
jorge if you look at the 2nd pic close you can see i shifted the fence to the rightalmost 10 inches about 2 years ago. this giives you 32 inches of ripping capasity to the right of the blade. you need to do this first to suport the router table
thanks all for the coments

-- self proclaimed copycat

View JoeyG's profile

JoeyG

1248 posts in 1311 days


#7 posted 01-31-2012 01:58 PM

Hi Eddy, Thanks for sharing this with me. It gives me more idea’s on how I can make my system work better for me.

-- JoeyG ~~~ http://www.facebook.com/JHGWoodWorks

View eddy's profile

eddy

928 posts in 2050 days


#8 posted 01-31-2012 04:38 PM

wait till you see the new pic’s with the incra TS LS system installed

-- self proclaimed copycat

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase