| Project by SteveTheGuitarGuy | posted 528 days ago | 939 views | 0 times favorited | 3 comments |  |
 |
SAMPLER
This Strat style guitar body was constructed in three layers.
The top layer is a sampling of reclaimed cherry, walnut, and mahogany woods.
The center section was constructed using reclaimed oak.
The bottom section features a three piece wedge design using reclaimed mahogany on either side and reclaimed walnut in the center. The inlays are reclaimed cherry wood.
| Pin It |
3 comments so far
CampD
home | projects | blog
1017 posts in 1653 days
#1 posted 528 days ago
That’s a nice combo, don’t see that much on a Strat.
How’s the tone?
-- Doug...
David Grimes
home | projects | blog
2114 posts in 806 days
#2 posted 528 days ago
It’s very unique. I can extrapolate from this that there is some use for all the cutting boards that are over-produced.
-- If you're going to stir the pot, think BIG spoon or SMALL boat paddle. David Grimes, Georgia
SteveTheGuitarGuy
home | projects | blog
23 posts in 532 days
#3 posted 528 days ago
Thanks Doug. . . the tone is pretty good, even with having used Squier strat parts. The denser woods definitely make a difference. Later bro!
Have your say...