|Project by Shanem||posted 12-08-2011 08:17 PM||1570 views||10 times favorited||16 comments|
I made a few bandsaw boxes so I was curious on whether I could make a shelf like it.
The shelf is made from construction 2X10 laminated together. The boxes centers are 24” apart so I could put a screw through the box into the studs.
Cutting the faces off the front of the drawers was the most difficult as there were no straight reference edges.
One thing I found was there is a heater below and it has caused the drawer to be more difficult to pull.
Thanks for looking.