End Grain Plywood Box

  • Advertise with us
Project by TheRookieJer posted 12-04-2011 01:49 AM 4781 views 1 time favorited 5 comments Add to Favorites Watch

This was my first project. It is made entirely of cheap BC plywood from the big box store. I had some left over from my dad and I started experimenting. I wanted a strict modern design that would be straightforward and easy to make. I finished with with a few coats of lacquer. What I learned: 1. There are many things I would change about this project… something I have learned that will always happen upon completion of a project and 2. Finishing (among other things) is not my strong suit.

I’ll keep trying…

-- Jeremy, Kingwood, Texas

5 comments so far

View Howie's profile


2656 posts in 2009 days

#1 posted 12-04-2011 02:06 AM

Does have an interesting look.
Keep going you’re doing good.

-- Life is good.

View doncutlip's profile


2832 posts in 2642 days

#2 posted 12-04-2011 02:44 AM

Good use of scrap

-- Don, Royersford, PA

View jaykaypur's profile


3750 posts in 1494 days

#3 posted 12-04-2011 02:59 AM

I like it and I bet it’s darn near indestructable too!

-- Use it up, Wear it out --------------- Make it do, Or do without!

View Popsnsons's profile


350 posts in 2068 days

#4 posted 12-04-2011 06:53 PM

Very unique. Good luck with setting up your shop. It’ll bring hours of fun and many learning experiences.

-- Pops ~ In So Cal...

View glue4you's profile


162 posts in 1566 days

#5 posted 12-05-2011 02:25 AM

Very unique look and really good for your first piece.

Keep going

-- Alex ----- Bavaria in Germany

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics