| Project by DarrylJN | posted 544 days ago | 1411 views | 5 times favorited | 6 comments |  |
 |
This remote control caddy is made from Mahogany and is approximately 8-1/2×7-1/2×6-1/2 (the highest point of the arch). The larger opening (3-1/2×6-1/2) can be used for a large remote control or an eBook reader such as a Kindle or Nook like the two shown in the last picture. The three smaller openings are 3-1/2×1-1/4 and 3-1/2×2-1/2 and should accommodate most normal size remotes. The caddy has been finished with 7 coats of General Finishes High Performance PolyAcrylic with 320 grit sanding between the first two coats, 400 grit for the next five coats, and #0000 steel wool for the last coat.
-- Darryl ~ Waxhaw, NC
| Pin It |
6 comments so far
Lifesaver2000
home | projects | blog
463 posts in 1285 days
#1 posted 544 days ago
Very nice, and I see a couple ideas on that I’ll have to ste… uh, borrow.
fayken
home | projects | blog
1 post in 731 days
#2 posted 544 days ago
Another outstanding project! When will you stop writing code and start making sawdust for living?
DarrylJN
home | projects | blog
192 posts in 736 days
#3 posted 544 days ago
Mike,
LOL! Maybe one day, I think I sill write code better than I wood work!
-- Darryl ~ Waxhaw, NC
DarrylJN
home | projects | blog
192 posts in 736 days
#4 posted 544 days ago
Feel free to stea… uh borrow anything you like from any of my projects. :)
-- Darryl ~ Waxhaw, NC
ed220
home | projects | blog
584 posts in 1565 days
#5 posted 544 days ago
Very cool. Have to agree with Lifesaver2000.
JasonC73
home | projects | blog
49 posts in 717 days
#6 posted 544 days ago
This is a great idea! I think I might have to make one with an auto retracting tether to the remote so I stop losing the freaking thing.
Have your say...