|Project by scamp238||posted 11-25-2011 07:00 PM||5880 views||14 times favorited||5 comments|
I decided to make a screw advance box joint jig. I bought some plywood and the hardware. It came from a plan I found on the internet. I used 3/4 plywood, 1/8 hardboard, 3/8 – 16 threaded rod, 3/8 nuts and washers. I spent a while doing this project. I wanted to make sure it was done right.
It took some tweaking to get it right. The plan on the internet was for a different saw. I dry fitted, checked it, adjusted it, dry fitted again and so on. I am just clamping it to my crosscut sled, which is a different project that I will post.
-- Brian, North Georgia