LumberJocks

Firewood and Kindling holders

  • Advertise with us
Project by redryder posted 1009 days ago 1493 views 2 times favorited 8 comments Add to Favorites Watch

Firewood racks for the woodstove in the shop.
Fir logs.
Tennons cut with dual edge tennon cutter from Woodcraft.
No finish. Rustic look….......

-- mike...............





8 comments so far

View Joe Lyddon's profile

Joe Lyddon

7681 posts in 2683 days


#1 posted 1009 days ago

Man… Looks like you’re all setup for some serious work!
A wonderful supply of wood! Good tools… And the talent to make something of them!

It’s going to be interesting to see what you do… & how you do it!

I remember looking at the price of that special tenon cutter… enough to choke a horse… it’s good to see that it will be put to a very good use!

Thank you for sharing!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View Bob A in NJ's profile

Bob A in NJ

1145 posts in 2630 days


#2 posted 1009 days ago

Great projects!

-- Bob A in NJ

View Andy123's profile

Andy123

226 posts in 1105 days


#3 posted 1009 days ago

I love the rustic look. You should make a bed or two like that!

-- The mistakes I make in woodworking are not mistakes they just give my projects character- Me

View Ken90712's profile

Ken90712

14878 posts in 1820 days


#4 posted 1009 days ago

What a fun project. I have always want to use one of those end tools. Very useful.

-- Ken, "Everyday above ground is a good day!"

View HalDougherty's profile

HalDougherty

1820 posts in 1868 days


#5 posted 1009 days ago

Great looking rustic furniture. I had been looking at those tools for a long time, but they are more expensive than I could justify… So, after another Lumberjock posted a tenion cutter he designed and mounted to his router, I made one that clamps to my router table. I have made a couple of benches or coffee tables with it and posted one of them as a project. When I made my last bench I took several 3” X 3” walnut beams and cut them into bench legs, then in about 15 minutes I cut 1 1/2” tenons on a big stack of them.

-- Hal, Tennessee http://www.first285.com

View Joe Lyddon's profile

Joe Lyddon

7681 posts in 2683 days


#6 posted 1008 days ago

Hal!

That is one COOL jig/fixture you got there!!

And super SIMPLE to make & use too!

Thanks again!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View dbhost's profile

dbhost

5378 posts in 1863 days


#7 posted 1008 days ago

I would LOVE to get my hands on a set of those tenon cutters! Great job!

-- My workshop blog can be found at http://daves-workshop.blogspot.com

View shelly_b's profile

shelly_b

841 posts in 749 days


#8 posted 618 days ago

I love your work! I can’t wait to get started, I just hope mine will turn out as well as yours!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase