LumberJocks

End grain cutting board #2

  • Advertise with us
Project by Antti posted 11-12-2011 10:17 AM 1515 views 0 times favorited 3 comments Add to Favorites Watch

Had to make one of these for own use as well. From the first one I had learned that it pays to leave some sticks longer than others for less problems in the planer after the first glue-up.
(btw, those in the picture are not the glues I used for this project, in case somebody wonders their water resistance…)





3 comments so far

View degoose's profile

degoose

7216 posts in 3108 days


#1 posted 11-12-2011 10:48 PM

Grain orientation is good… all over a nice job…I like the muted colour..

-- Don't drink and use power tools @ lasercreationsbylarry.com.au

View amagineer's profile

amagineer

1415 posts in 2351 days


#2 posted 11-13-2011 01:30 AM

Nive CB, what kind of wood did you use.

-- Flaws are only in the eye of the artisan!

View Antti's profile

Antti

77 posts in 2364 days


#3 posted 11-13-2011 08:13 AM

Thanks for your comments. The woods are mostly walnut and elm, and there is one (the largest) strip of oak. I left the maple (which I had in my first board) out to have less contrast. those are the only hardwood scraps I have so far, and I think I have to get further with my “real projects” before I have enough for another cutting board…other than that, I will be using “non-scrap” for a cutting board come Christmas…

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com