| Project by doncutlip | posted 848 days ago | 1012 views | 4 times favorited | 4 comments |  |
 |
I built this cart to hold tools and accessories for my table saw. The drawer boxes are 22×18, biscuit joints on the corners, 1/2 inch plywood for a bottom, ball bearing full extension slides. The carcass is 3/4 plywood with some rabbets at the bottom and pocket hole joints everywhere else. Paint is hunter green.
-- Don, Royersford, PA
| Pin It |
4 comments so far
Beginningwoodworker
home | projects | blog
13331 posts in 2132 days
#1 posted 848 days ago
Beautiful shop cart.
-- CJIII Future cabinetmaker
live4ever
home | projects | blog
981 posts in 1469 days
#2 posted 848 days ago
Nicely done – matches the bottom of your saw perfectly. :)
-- Optimists are usually disappointed. Pessimists are either right or pleasantly surprised. I tend to be a disappointed pessimist.
RibsBrisket4me
home | projects | blog
1329 posts in 965 days
#3 posted 848 days ago
well executed!
-- Todd http://www.PictureTrail.com/gid6255915
workerinwood
home | projects | blog
2637 posts in 1527 days
#4 posted 848 days ago
Nice work!!
-- Jack, Albuquerque
Have your say...