Hexagonal Table

  • Advertise with us
Project by concretepicture posted 11-03-2011 10:38 PM 1419 views 0 times favorited 8 comments Add to Favorites Watch

This side table was the culmination of a fair amount of wood milling. The result was some very unique wood patterns that really add a lot of detail to the piece. I was quite pleased with how both the wood and the concrete turned out. I cut down the oak from an old Savannah homestead – the owner was adding a garage. The concrete is made from white cement with a tan sand and has a design strength of 8000psi. The top is 1.5″ thick with the embedded arrows. The entire top has a 1/8″ high gloss epoxy finish that is heat resistant. I gave it to my parents.


8 comments so far

View SASmith               's profile


1850 posts in 3188 days

#1 posted 11-03-2011 11:54 PM

Unique table. I had never seen wood inlaid into concrete.
Welcome to LumberJocks.

-- Scott Smith, Southern Illinois

View doncutlip's profile


2832 posts in 3757 days

#2 posted 11-04-2011 12:36 AM

I like how the leg tops show through, and the details are fanstatic, great job

-- Don, Royersford, PA

View Napaman's profile


5530 posts in 4278 days

#3 posted 11-04-2011 04:07 AM

i like the top.

-- Matt--Proud LJ since 2007

View devann's profile


2246 posts in 2893 days

#4 posted 11-04-2011 04:21 AM

Your table looks cool. Don’t see many hexagon shaped. Leg location for me in the past has been a dilemma. What are the dimensions?

-- Darrell, making more sawdust than I know what to do with

View Bernie's profile


422 posts in 3038 days

#5 posted 11-04-2011 05:08 AM

Very impressive, especially when considering the fact that you mixed wood and concrete into the project. Just the woodworking and the angles and joints are impressive – But adding concrete – WOW. Your parents raised quite the son they are most certainly proud of. Congratulations to the whole family!

-- Bernie: It never gets hot or cold in New Hampshire, just seasonal!

View concretepicture's profile


8 posts in 2600 days

#6 posted 11-04-2011 10:24 PM

The hexagonal top measures 24″ from side to side and 27″ from corner to corner. It is 23” tall. I found that using only three legs eliminated the chance (more like a guarantee) that one or more legs would not contact the ground. I would have struggled with six legs.
Thanks for all of the encouragement.


View devann's profile


2246 posts in 2893 days

#7 posted 11-05-2011 12:46 AM

Thanks for the dimension post concrete.

I’ve been making some six sided tables, but use a single center post and then four legs with adjustable feet to keep it from tipping over.

-- Darrell, making more sawdust than I know what to do with

View enzo61's profile


100 posts in 3413 days

#8 posted 11-06-2011 09:05 PM

Very good work…............compliments.

Please you have the pattern????

Thank you Enzo

-- by enzo61

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics