or Join Now!
I’ve made a finger joint jig, Linear bearing & rail it’s rest from a overhauled machine the jig is very tight and stable. I’ve use M6 threaded rod. 1 turn its 1mm
-- Lars, woodworker from Norway.
Nov 02, 2011
home | projects | blog
62 posts in 1778 days
Preview this project card
2341 posts in 1871 days
#1 posted 11-02-2011 05:11 PM
Nice! That looks like a slick unit!
-- Randy "You are judged as much by the questions you ask as the answers you give..."
13496 posts in 2051 days
#2 posted 11-02-2011 05:22 PM
That is really neat. Jigs like that are so handy for good repeatability!!Thanks for sharing. I like the design!!Do you use it with a dado on the table saw? .......Jim
-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!
197 posts in 2006 days
#3 posted 11-02-2011 06:43 PM
Similar to mine, but lots, lots better. Nice job!
-- My table saw laughs at hot dogs. http://thesorteddetails.blogspot.com/
12951 posts in 1639 days
#4 posted 11-02-2011 06:48 PM
I like anything with linear bearing involved!
-- My dad and I built a 65 chev pick up.I killed trannys in that thing for some reason-Hog
799 posts in 1881 days
#5 posted 11-02-2011 07:02 PM
That’s awesome! I don’t see an index pin. Do you crank it for each pass?
#6 posted 11-02-2011 07:11 PM
Hi,answer for your qustion:I use 4 and 6mm saw blade. dado is not allow in Norway. And i’ve not find any blade on the web for my tablesaw.I’ve a index, look at pic #2 its a brass nail nearly touch the corner on the plywood (blue arrow).
2698 posts in 2232 days
#7 posted 11-02-2011 07:34 PM
Thanks for sharing
-- She thought I hung the moon--now she just thinks I did it wrong
519 posts in 1411 days
#8 posted 11-03-2011 04:48 AM
Please share the source of the bearings and track with us. I could think of several uses.
-- Crashn - the only thing I make more of than sawdust is mistakes
#9 posted 11-03-2011 03:31 PM
Hi,Linear Bearing & rail is very expensive issues. see the link below. ok to buy used if it is well maintained. very durable.my bearing is star, same as Bosch Rexrot
17781 posts in 1812 days
#10 posted 11-03-2011 03:33 PM
It’s a wonderful jig.
-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau
#11 posted 11-03-2011 03:43 PM
Speaking of linear bearings, where is August Lehman? I haven’t see him around in a while. He’s got more linear bearings than I’ve got sense.
10490 posts in 2035 days
#12 posted 11-04-2011 12:35 AM
Hey Lars,Den kæmpe fin!That is a really cool jig, I think I will have to look into this since we have no dado sets in Denmark and I would like to be able to make fingerjoints on my table saw.Thanks for sharing.Best thoughts,Mads
-- MAD F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.
#13 posted 11-05-2011 03:33 AM
thanks for the link. Price is not too bad, but I have some studying to do before I can figure out what is needed :)
3896 posts in 1613 days
#14 posted 11-07-2011 07:05 AM
Very well done and looks very safe to use .Now lets see some projects coming of this beautiful jig !
-- Kiefer 松
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics