|Project by Trev_Batstone||posted 10-31-2011 07:45 AM||2170 views||5 times favorited||3 comments|
OK, so I had to join the LumberJocks wine bottle holder revolution and see if I could succeed at making it. This one is my ‘prototype’ and it turned out perfectly (I think). The wood is 12” in length by 3” wide. The bottom bevel is 45 degrees and the hole is 1 1/8” also drilled at 45 degrees, which balances a 750 ML bottle perfectly level. I made this one from a piece of oak that was staring me in the eyes and begging me to turn him into something useful. As you can see, I rounded the top of the board and also used a round-over router bit on the edges of both sides of the board. This one does not have any finish on it yet, but I plan to make more very soon.
-- LIVE, LAUGH, CUT WOOD.