LumberJocks

the mushroom

  • Advertise with us
Project by aviad mishaeli posted 1005 days ago 1300 views 0 times favorited 8 comments Add to Favorites Watch

it is actualy a coffe table that got twisted because of Pressure from different directions caused by wood moving.
its 90 s”m high and 100 s”m in diameter. i Filin it using lathe with Sharpening angle tool with sandpaper.





8 comments so far

View lanwater's profile

lanwater

3075 posts in 1535 days


#1 posted 1005 days ago

Impressive!

-- Abbas, Castro Valley, CA

View sras's profile

sras

3780 posts in 1730 days


#2 posted 1005 days ago

I sure enjoy seeing all that you have made. Thanks for sharing.

-- Steve - Impatience is Expensive

View darryl's profile

darryl

1792 posts in 2927 days


#3 posted 1005 days ago

that is AWESOME!
oh i wish i had more than just a little jet mini lathe!

View bobasaurus's profile

bobasaurus

1179 posts in 1785 days


#4 posted 1005 days ago

These things are quite remarkable. The patience involved for segmenting must be tremendous.

-- Allen, Colorado

View SawTooth1953's profile

SawTooth1953

276 posts in 1907 days


#5 posted 996 days ago

Please explain: what is s”m ? How high is something that is 90 s”m high?

You said, “it is actualy a coffe table that got twisted because of Pressure from different directions caused by wood moving” ... you are joking, right?

-- Spence in Skokie, IL

View aviad mishaeli's profile

aviad mishaeli

92 posts in 1009 days


#6 posted 996 days ago

you asked me about s”m . i guess i didnt pronaunced it well , i ment 90 sentimiter – something like 37 inchs . the table platforme has twisted and i had to cut it fot tow picess from the neck . this table is mad out of many small picess that conected in such way that the wood can not expend freely so it twisted. i wasent joking , iprobably wasent clear. thank you
aviad

View LonelyRaven's profile

LonelyRaven

44 posts in 1964 days


#7 posted 995 days ago

I love your work, Aviad. I wish you had a video of how you make these pieces. I’m sure a lot of people could learn from your work.

View SawTooth1953's profile

SawTooth1953

276 posts in 1907 days


#8 posted 994 days ago

Hi… thanks for explaining s”m . I understand metric units, but I am used to the abbreviation ” cm ” for centimeter (and ” mm ” for millimeter).

I do love this project… but I’m still not understanding where it is “twisted because of pressure”, etc.

I don’t see anything wrong with it.

-- Spence in Skokie, IL

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase