or Join Now!
oak table 200 s”m by 110 s”m . Insert holes and pins strengthening ties were made by tablesaw . i cut the holes in u shape in two picess of Beams of wood and then i glow them . its creates perfect sqwer channal for the pins.
home | projects | blog
94 posts in 1494 days
Preview this project card
551 posts in 2517 days
#1 posted 10-25-2011 01:36 AM
Pretty sure you mean “pins” rather than penis….have to keep the young lumberjocks concentrating on their wood…so to speak.
And my apologies. This and virtually everything you’ve posted here is amazing craftsmanship. I have not seen an item I didn’t wish I had the guts to make.
-- Scott, Irmo SC
522 posts in 1551 days
#2 posted 10-25-2011 01:45 AM
Never posted, but had to comment on that typo!
-- Crashn - the only thing I make more of than sawdust is mistakes
29 posts in 1492 days
#3 posted 10-25-2011 01:53 AM
not a typo as much as a translating error check his face book from israel so must be a bad translation
211 posts in 2204 days
#4 posted 10-25-2011 01:58 AM
funny just the same! lol wonder if it means wedge.
-- wood tick tools for turners by woodtickgreg @ woodbarter.com
691 posts in 2320 days
#5 posted 10-25-2011 03:12 AM
Brian, thanks for the laugh, i needed that.
the table looks great, nice modern feel to it.
-- Z, Rockwall, TX
8522 posts in 2734 days
#6 posted 10-25-2011 03:21 AM
love the design and the easy lines (easy to the eye) as well as the massive wedges
-- ㊍ When in doubt - There is no doubt - Go the safer route.
28 posts in 1913 days
#7 posted 10-25-2011 05:41 AM
that made my night.
11781 posts in 2774 days
#8 posted 10-25-2011 06:02 AM
Great looking table : ) Did you also make the cutting board ?
-- I'm absolutely positive that I couldn't be more uncertain!
22 posts in 1671 days
#9 posted 10-25-2011 07:55 AM
I also have been trying to create a perfect sqwer channel for my penis….
-- Got Wood?
207 posts in 2556 days
#10 posted 10-25-2011 04:05 PM
Great looking table. I really like it.
-- "Never measure......cut as many times as necessary." - PeteMoss
16034 posts in 2275 days
#11 posted 10-25-2011 06:30 PM
Nice job, like the look of this, the thru ins are a nice touch.
-- Ken, "Everyday above ground is a good day!"
447 posts in 1719 days
#12 posted 10-25-2011 06:39 PM
Beautiful table! I would be pleased to have one just like it!
-- Patrick, Helicopters don't fly. They beat the air into submission.
345 posts in 1697 days
#13 posted 10-25-2011 07:01 PM
Gorgeous. Simple, functional, and appealing. Job well done.
-- "There's plenty of time to read the instruction manual when you're laying in the hospital bed". - Dad
1416 posts in 2239 days
#14 posted 10-25-2011 08:11 PM
Love the table…...but I am 6’9” tall with long legs and had a lot of experience with tables. This one looks like a real knee & shin breaker. Warn people to slide their chair in slowly.
-- Directions are just the Manufacturer's opinion on how something should be assembled. ----Mike, Waukesha, WI
6695 posts in 1928 days
#15 posted 10-26-2011 03:59 PM
Lost in translation, but not in the visual communication. Nice work. I like the tennon concept for the table and the confrence table. Nice design and it allows for easier transport. Are the woods you use common to your area?
-- Cau Haus Designs, Thomas J. Tieffenbacher
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics