or Join Now!
It’s the same as the bolt thru the wood. My main fear was that the marbles would crack but, they did ok. Gonna be lots of fun….
-- Gary, DeKalb Texas only 4 miles from the mill
home | projects | blog
7751 posts in 2253 days
Preview this project card
10850 posts in 1935 days
#1 posted 10-13-2011 07:38 AM
yep its marblewood you gesst correct … :-)
thank´s for sharing
4 posts in 1237 days
#2 posted 10-14-2011 10:41 PM
#3 posted 10-14-2011 11:42 PM
Gary … how did you made the inside corners so there is room enoff for the marbles with a knife or…..
#4 posted 10-15-2011 02:33 AM
Dennis, I used a knife to trim the inside before I boiled it. Then, after the marbles were in, I used sand paper to clean up the insides. I didn’t show the finished product. I sanded the whole thing and gave it shape. It’s down at the hardware store now.
#5 posted 10-15-2011 04:27 AM
Thank´s Gary I thought it was something like that I still remember how I cut a rectangle lamp with a knife as boyscout but instead ofhaving a candle inside we cut a ball ( that cuoldn´t get out ) out of the same piece of wood so when carving the lamp you also formed the ball a nice little winther job for a knife :-)
#6 posted 10-15-2011 04:37 AM
About 3 decades ago I used to carve balls in a cage and chains. It was fun then. Never carved a lamp….
#7 posted 10-15-2011 05:39 AM
I think the lamp and cage is the same more or less just different names for it :-)
9 posts in 1223 days
#8 posted 11-07-2011 01:39 AM
Been wondering how I should display my old marbles.
-- It's just cutting, sanding, glueing & finishing!
3340 posts in 1307 days
#9 posted 11-07-2011 01:55 AM
My wife says I lost my marbles years ago so I can’t make one like that!
-- Improvise.... Adapt...... Overcome!
#10 posted 11-07-2011 06:33 AM
Oh man, Dallas…that’s cold. Need me to send you a few??
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics