LumberJocks

Vase turned with glass insert

  • Advertise with us
Project by paplou posted 10-11-2011 05:38 PM 850 views 0 times favorited 2 comments Add to Favorites Watch

This was a mistake that worked out ok. I cut circles of cherry of difference sizes then drill 2 inch holes so I could insert the glass tube after finishing. I greased up the glass so the glue would not stick to the glas then glued up the rings over the glass tube. After the glue dried the glass would not slide out. I had drilled the holes to just the exact size of the tube, 2 inchs. The squeeze out of glue must of put to much pressure on the tube.
I said the hel_ with it and turned the vase with the glass in it. It did make for an easy glue up since the rings fit so tight and there was no way to get it out of line. To me it looks good and is water proof on the inside.

-- PAPLOU





2 comments so far

View Porchfish's profile

Porchfish

583 posts in 1286 days


#1 posted 10-11-2011 06:20 PM

Now I know you planned that all along, a waterproof vase…of course , it makes perfect sense. Good planning, good job !

-- If it smells good, eat it ! The pig caught under the fence is the one doing all thesquealing

View peteg's profile

peteg

3009 posts in 1576 days


#2 posted 10-11-2011 10:21 PM

You gotta get lucky sometimes, nice outcome :)

-- Pete G: If you always do what you always did you'll always get what you always got

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase