LumberJocks

One down one to go

  • Advertise with us
Project by therookie posted 09-26-2011 03:26 AM 2498 views 0 times favorited 12 comments Add to Favorites Watch

Well today I got my planer back together. I am so happy that it is done. So here are some pics of it:
Pic 1: The completed planer
Pic 2: The 7.5 hp single phase motor
pic 3: The Special plug hooked up to the #8 wire
Pic 4 and 5: Test cut pics (just a 2×6 planed to 3/4”)

So now I get to stabilize my lathe then turning projects. :)

(Ok so its not made of wood but Still)

-- http://aewoodworks.webs.com





12 comments so far

View lew's profile

lew

10056 posts in 2421 days


#1 posted 09-26-2011 03:29 AM

I can’t begin to tell you how jealous I am ;^)

Great job, Adam!

Lew

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View maljr1980's profile

maljr1980

171 posts in 1122 days


#2 posted 09-26-2011 03:35 AM

nice machine, 18”, 22”?

View therookie's profile

therookie

887 posts in 1493 days


#3 posted 09-26-2011 03:36 AM

Thanks lew
@maljr, 24”

-- http://aewoodworks.webs.com

View Beginningwoodworker's profile

Beginningwoodworker

13342 posts in 2338 days


#4 posted 09-26-2011 03:42 AM

Nice planer.

-- CJIII Future cabinetmaker

View gfadvm's profile (online now)

gfadvm

10977 posts in 1355 days


#5 posted 09-26-2011 03:53 AM

I’m really impressed and jealous. That is a BEAST! Enjoy and good luck in your endeavers. You are an ambitious young man and I know you will be a success.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View ShaneA's profile

ShaneA

5311 posts in 1264 days


#6 posted 09-26-2011 04:20 AM

Its a beast. Good luck with that bad boy.

View jumbojack's profile

jumbojack

1189 posts in 1290 days


#7 posted 09-26-2011 04:21 AM

Your planer is green and so am I….....with envy.

-- Made in America, with American made tools....Shopsmith

View Richard 's profile

Richard

392 posts in 1787 days


#8 posted 09-26-2011 04:31 AM

I be there in 15 minutes. I have some rough stock for you to plane, I took out most of the nails and railroad spikes I could find. The barbwire was a bit of a problem though.

Nice Planer. How much does it take off in one pass?

-- Richard Boise, Idaho

View maljr1980's profile

maljr1980

171 posts in 1122 days


#9 posted 09-26-2011 04:39 AM

old green powermatic?

View Sodabowski's profile

Sodabowski

2026 posts in 1498 days


#10 posted 09-26-2011 10:59 AM

What a beast o_o

Now go fix that date problem with your camera! ;)

-- Holy scrap Barkman!

View therookie's profile

therookie

887 posts in 1493 days


#11 posted 09-26-2011 03:44 PM

Thanks for the comments everyone, Richard, I have taken 4 revolutions off with the handle which is 0.160 or just over an 1/8th of and inch which is 0.125. And I will be waiting for the rough stock I get $100 for each piece of metal. lol sooooo…...

Maljr, the planer is a 2001 grizzly that came out of a mill and was used a lot.

Soda, I have tried to fix the issue but nothing seems to work must be the operator. ;)

-- http://aewoodworks.webs.com

View Bob817's profile

Bob817

650 posts in 1048 days


#12 posted 03-20-2012 03:39 PM

24” Wow that’s what I call a Machine….Nice!

-- ~ Bob ~ Newton, N.H.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase