|Project by PASs||posted 09-21-2011 09:20 PM||1758 views||1 time favorited||1 comment|
This is the second dive knife display for the same customer.
For this one I made a template of the handle instead of freehand turning.
The base is also wider as the stock I split was wider.
The base is book-matched.
The supports were each turned to fit either the handle or the scabbard.
The wood was sanded to 320 grit.
The finish is a 2 pound shellac polished with the Beall system
-- Pete, "It isn't broken, you just aren't using it right."