|Project by pbjguy||posted 09-20-2011 08:42 PM||11685 views||64 times favorited||24 comments|
Here are some more shots of my Miter saw counter in progress I have posted this project before. As I go I have more pics. I Still need to make the fence. I hooked up a good quality hose from the saw to a 1 1/2 pvc adapter into a 2 inch elbow to a 3 inch into a 4 inch. The rear dust collection is a 4 inch T with a round to rectangular downspout fitting. I made the rear plate removable in case something got jammed and so I can modify the rectangular opening bigger or smaller. I’m not sure how much suction the saw needs. Also I used Blue mica and some figured maple on the edges just for kicks. There is about a 3/8 inch gap at the back of the removable plate for dust that the hose misses. The Bosch is a great saw. If you are thinking of getting one just use the clamp that comes with it and a zero clearance fence if you are cutting small pieces it likes to throw things.