or Join Now!
The rocking chair was the next thing I built after the cradle. I have made three so far one for my daughter and two for grand daughters.
home | projects | blog
46 posts in 1744 days
Preview this project card
43 posts in 1910 days
#1 posted 09-19-2011 09:01 PM
Beary cute ;-) I know the little ones you built them for will love them.
-- Docopac (a carpenter in a different medium)
102 posts in 1802 days
#2 posted 09-19-2011 10:51 PM
3 posts in 1684 days
#3 posted 11-18-2011 01:01 AM
Hi I was wondering where I could purchase the plans for this project
#4 posted 11-18-2011 01:02 AM
Excellant job by the way!!!!
#5 posted 11-18-2011 05:51 AM
It is from Wood magazine Issue 66. They do have back copies still on there site if you don’t have it, here is the linkhttp://www.woodstore.net/is66dec19.htmlIf you do get the plans and make it there are a few corrections to the plans that you can get from there web site. If you have any question just ask.ThanksScott
114922 posts in 2879 days
#6 posted 11-18-2011 07:40 AM
Grrrrrr 8 I like them ,I’ll have to put them on the grand child to do list. Your chairs look super.
-- http://artisticwoodstudio.com Custom furniture
#7 posted 11-18-2011 02:12 PM
If anyone is going to make these be sure and make templates for the parts. After people see it you will be making more of them. I have made three so far. Scott
#8 posted 11-19-2011 10:43 PM
Thanks for the reply! I went to there site and ordered the back issue. Thanks again.
#9 posted 11-20-2011 04:50 AM
Here are the corrections that Wood has made to the plan, make sure and change them when you get the back issue.
Page36 Teddy Bear Chair Step 2: 3/4”-thick cherry to 1 5/8”x18 1/4”
37 Teddy Bear Chair Exploded View: Part E, 6 1/4” from top of leg to seat top
37 Teddy Bear Chair Backrest: Part B, 11 3/4” should be 11 1/8”; 8 1/4” should be 7 1/8”
40 Teddy Bear Chair Final Assembly: Top (A) 11 3/8” should be 10 1/4” to top of armrest
41 Teddy Bear Chair Full-sized front leg patterns: 5 1/2” should be 6 5/8”
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics