Oval table top

  • Advertise with us
Project by mailee posted 09-07-2011 10:20 PM 1145 views 0 times favorited 1 comment Add to Favorites Watch

This was a bit unusual as it was a table top to fit over a poker table. The top measured 8’ x 4’ and was made of ash veneered MDF. This was wrapped with Mahogany strips laminated up to 1 1/2” and then routed to profile. The apron was made from laminated Pine and again wrapped in Ash veneer. The inside of the apron was tapered to allow it to centre on the poker table. I found out on this job that I definitely need more clamps! :-)


1 comment so far

View Ken90712's profile


17563 posts in 3212 days

#1 posted 09-08-2011 10:35 AM

Nice job and good idea using biscuits for the clamps very nice.

-- Ken, "Everyday above ground is a good day!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics