|Project by bubbared||posted 09-02-2011 11:11 PM||1272 views||3 times favorited||4 comments|
This is my first attempt at turning some rings on my lathe the first is cocobolo and maple and the second is cocobolo and same with the third there not perfect but im pretty happy with the result, as always thanks for looking and all comments are welcomed.
The two are sitting on a Bamboo and Cocobolo lid I did for one of my previous Cocobolo bowls
Just finished with a coat of wax
I turned 3/4 of the ring cut it free then used a scrap piece to turn a tenon to complete the opposite side sanded to 600
-- Joe, Florida