|Project by ChuckM||posted 08-30-2011 08:15 PM||3392 views||13 times favorited||8 comments|
Obtained this wax buffing trick from my tipster friend, LJ Brico Fleur (http://atelierdubricoleur.wordpress.com). This tip of his, I learned, was published in PWM.
What you need:An ROS, a coarse grit disc (I used 60 grits), and a piece of felt.
After a coat of wax is uniformly applied to the tablesaw, place a large piece of felt on the tablesaw and then the ROS (with the 60 grit disc mounted). Turn on the sander and buff your way to a silk smooth surface.
Thanks Serge, for saving me from a lot of unnecessary elbow grease. The whole job took a minute or two only.
-- The time I enjoy wasting is not time wasted