|Project by dakotawood||posted 08-21-2011 11:37 PM||16433 views||217 times favorited||51 comments|
Alright, I just finished my assembly table/outfeed table, courtesy of the Great Whispering Spagnuolo. I absolutely loved the plan and concept. I don’t think my table differs too much from Marc’s. Here’s some specs:
3/4” birch ply for base
8 drawers, 4 doors
Full ext slides
Wired for 12 outlet bank on one end, on other end are two standard outlets
One interior outlet switched for my pancake compressor, which has coiled hose on outside of base
1/2” MDF torsion top
1/2” hardboard on top of mdf, only screwed
Trimmed with 3/4” oak, chamfered edge
Top appx 1/4” lower than my table saw
All finished with 3 coats poly
I love this table – ‘nuff said. Love the quieter compressor, the always handy coiled air hose, the large flat work surface it provides, the large outfeed table it provides, the mobility on casters (I can roll it onto driveway if I want), the great storage capacity, all the full ext drawers, etc.
Thanks for looking!
-- Travis, South Dakota