LumberJocks

spoon carving class

  • Advertise with us
Project by Billinmich posted 08-11-2011 08:37 PM 1384 views 0 times favorited 9 comments Add to Favorites Watch

This is my carving for the spoon carving class.I used mahogany which I had laying around.After I cut out the spoon i realized the top cut off was almost a good as my intended spoon,so I had a practice spoon to work on.Finished with boiled linseed oil.I carved them with chisels and power carver hope that is legal.Did a little woodburning and glued in some swarovsky crystals for the eyes.I won’t be using this to stir the pot ,but had a good time carving them.

-- Bill in Mich





9 comments so far

View helluvawreck's profile

helluvawreck

21474 posts in 2134 days


#1 posted 08-11-2011 09:48 PM

These are really nice. You did a good job.

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Bertha's profile

Bertha

12982 posts in 1960 days


#2 posted 08-11-2011 10:01 PM

wow! These are great!

-- My dad and I built a 65 chev pick up.I killed trannys in that thing for some reason-Hog

View WayneC's profile

WayneC

12642 posts in 3365 days


#3 posted 08-11-2011 10:57 PM

Very nice.

-- We must guard our enthusiasm as we would our life - James Krenov

View Bearpie's profile

Bearpie

2601 posts in 2285 days


#4 posted 08-11-2011 11:09 PM

Nice work on those but many ladies will not use these at all and would throw ‘em in the trash! Snake aficionados on the other hand will love ‘em.

-- Erwin, Jacksonville, FL

View Spoontaneous's profile

Spoontaneous

1324 posts in 2597 days


#5 posted 08-12-2011 03:38 AM

Bill…. those are a couple of really, cool spoons!! You have a much steadier hand than I do, the way you manage to burn in a signature that small. The scales are cool and so are the eyes. A+ top to bottom.

-- I just got done cutting three boards and all four of them were too short. (true story)

View Rustic's profile

Rustic

3218 posts in 2864 days


#6 posted 08-12-2011 05:17 AM

Beautiful work

-- www.carvingandturningsbyrick.com, Rick Kruse, Grand Rapids, MI

View Billinmich's profile

Billinmich

238 posts in 2999 days


#7 posted 08-12-2011 05:43 AM

Thanks guys.had a good time carving them and can’t wait to see all the rest

-- Bill in Mich

View Maveric777's profile

Maveric777

2692 posts in 2344 days


#8 posted 08-12-2011 02:27 PM

Yea… These are pretty cool…

-- Dan ~ Texarkana, Tx.

View MoshupTrail's profile

MoshupTrail

302 posts in 1748 days


#9 posted 08-18-2011 12:56 PM

Nice workmanship, but holy cow! If I put one of those in a kitchen drawer, you can’t imagine the fireworks that would follow upon its discovery!

-- Some problems are best solved with an optimistic approach. Optimism shines a light on alternatives that are otherwise not visible.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com