Bed Tray

  • Advertise with us
Project by benihun posted 08-05-2011 03:02 PM 2209 views 3 times favorited 6 comments Add to Favorites Watch

Used for
1. Giving breakfast to the girlfriend lying in the bed :)
2. Using laptop on it while in bed

Scots Pine (Pinus sylvestris)

2 coats of oil

Width: 625 mm
Height: 235 mm
Depth: 295 mm

6 comments so far

View Shrub's profile


159 posts in 3272 days

#1 posted 08-05-2011 03:14 PM

Great idea and pretty grain lines.

-- Shrub G. , Dalton Georgia

View Bill729's profile


241 posts in 3082 days

#2 posted 08-05-2011 03:20 PM

Nice idea. Maybe second handle closer to the top would make it easier for the encumbent to remove it herself?


View RustyL's profile


47 posts in 2692 days

#3 posted 08-06-2011 03:32 AM

It is nice looking and the grain pops just right.
Are your joints glue only?

Thanks for sharing,

-- Don't apprentice under anyone with less than ten fingers.

View benihun's profile


33 posts in 3647 days

#4 posted 08-08-2011 08:05 PM

Thanks everybody!

Yes, there are no metal parts in it, it is only the glue in the groove, that holds the tongue of the sides to the top.

View NiteWalker's profile


2737 posts in 2577 days

#5 posted 09-13-2011 12:19 AM

Looks good!

-- He who dies with the most tools... dies with the emptiest wallet.

View helluvawreck's profile


31105 posts in 2867 days

#6 posted 03-21-2018 04:39 PM

These bed trays are always a nice practical project and you have done a fine job on this one.

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics