| Project by Trev_Batstone | posted 659 days ago | 619 views | 0 times favorited | 3 comments |  |
 |
I made this plaque as a gift for my son, a pilot for Harbour Air Seaplanes based out of Vancouver. The plaque is 3/4” laminated pine, but I didn’t want the cutting to be that deep, so I routed out 1/2” on the back part where the airplane is so that the cutting is only 1/4” thick. I then inserted a black poster board with a thin ply backing. The lettering is cut from 1/4” Cherrywood. Five coats of spray lacquer applied.
-- LIVE, LAUGH, CUT WOOD.
| Pin It |
3 comments so far
huntter2022
home | projects | blog
275 posts in 783 days
#1 posted 659 days ago
You did a great job on it and sure your son will love it
-- David ; "BE SAFE BE HAPPY" Brockport , NY
Ken90712
home | projects | blog
12660 posts in 1356 days
#2 posted 659 days ago
Well done, when Blondie and I up to Vancover next will have to look his company up for a flight.
-- Ken, "Everyday above ground is a good day!"
Trev_Batstone
home | projects | blog
317 posts in 660 days
#3 posted 659 days ago
Thanks, guys for the comments. My son said that the seaplane cutting was ‘Bang On’. He loves it.
-- LIVE, LAUGH, CUT WOOD.
Have your say...