|Project by sugarpine||posted 07-29-2011 04:13 PM||2699 views||0 times favorited||3 comments|
My client wanted a louvered door for her tall bathroom storage shelves but didn’t want to clean traditional louvers. The door’s rails and styles were made of 3/4” basswood (to keep the weight down) with mortise and tenon joinery. A 1/8” baltic birch plywood panel was inset flush into the back. The louvers on the front were pieces of primed MDF case molding that were epoxied in place. All the louvers were ripped to width and had a dadoed groove down the back side, once again to reduce the weight of the door.