| Project by bvdon | posted 693 days ago | 2748 views | 19 times favorited | 9 comments |  |
 |
Portable Wood Storage Rack for smaller pieces of wood. Keeps things organized and is on wheels, so can move when needed.
Materials used were 2×4(2) and a few 1×2 pine and wheels all from big box store.
One the 3rd picture near the rear wheels I attached one small block for each of the two rear wheels… they have about 3/32 inch clearance from the ground. I did this to prevent tipping when moving it. Because the wheels are INSIDE and the heaviest/tallest pieces of wood go in the back, it had a very slight tendency to want to tip. The blocks completely fixed the issue.
| Pin It |
9 comments so far
RalphCompton
home | projects | blog
47 posts in 846 days
#1 posted 693 days ago
Nice!
dakremer
home | projects | blog
2259 posts in 1289 days
#2 posted 693 days ago
nice rack!
-- Hey you dang woodchucks, quit chucking my wood!!!!
bvdon
home | projects | blog
454 posts in 1212 days
#3 posted 693 days ago
IF you look a the 4th pic, you can clearly see I like to rack and roll.
-- http://woodwork.me
Tootles
home | projects | blog
655 posts in 699 days
#4 posted 693 days ago
Nice design.
I’m struggling with managing wood offcuts in my shed, I might be able to use this as inspiration to solve my problems. Thank you.
-- I may have lost my marbles, but I still have my love of woodworking
workerinwood
home | projects | blog
2540 posts in 1265 days
#5 posted 693 days ago
Great idea!! Nice build.
-- Jack, Albuquerque
Ian W
home | projects | blog
18 posts in 799 days
#6 posted 682 days ago
Very nice idea. I think that I will building something like it for my shop.;
cheers Ian W
-- any time in the wood shop is GOOD TIME
LukieB
home | projects | blog
679 posts in 527 days
#7 posted 523 days ago
I like it, I need to do something very similar for my mess of a lumber pile. Nice job.
-- Lucas, "Someday woodworks will be my real job, until then, there's this http://www.melbrownfarmsupply.com"
Mike Merzke
home | projects | blog
18 posts in 361 days
#8 posted 354 days ago
Great design, I think you’ve just helped me solve part of my wood storage problem.
-- Mike Merzke
GrandpaLen
home | projects | blog
987 posts in 470 days
#9 posted 354 days ago
A Perfect solution, for my shop. Hadn’t even given any thought to this , till now.
This is a great design and is just right for staging milled parts prior to glue-ups and assembly. You have just reduced the clutter in my assembly area.
Thanks for sharing. – Len
-- Mother Nature should be proud of what you've done with her tree. - Len ...just north of a stone's throw from the oHIo, river that is, in So. Indiana.
Have your say...