LumberJocks

Chalkboard Built-in Murphy bed | Custom

  • Advertise with us
Project by Chris Davis posted 07-25-2011 02:01 PM 3699 views 2 times favorited 1 comment Add to Favorites Watch

This is a murphy wall bed that was completed in March 2011. It was one that had to have a lot of pre-planning. The customer, which is located out of state, wanted it built in. It was a not so typical configuration on the layout. The ceiling had a 45 degree turn about 7” down. We also had to come up with something to do with the window that wasn’t centered.

The customer was pretty handy and would install it and add the trim to give it that built in look. It turned out great. I did have to send a piece of crown (see some missing in pictures) because of a last minute change on how it would terminate at the top.

For more building pictures see my Current Projects link at wwbeds.com or poggyskids.com.

-- Watch live video from our shop. http://www.wwbeds.com/#!current-projects/c3c1





1 comment so far

View sras's profile

sras

4647 posts in 2946 days


#1 posted 08-13-2011 03:23 PM

A custom design and fit like that is going the extra distance! Nice job!

-- Steve - Impatience is Expensive

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com