LumberJocks

Incra Offset Router Table

  • Advertise with us
Project by dragondncr posted 07-25-2011 02:21 AM 3257 views 11 times favorited 7 comments Add to Favorites Watch

Finished my router table, thanks to SWM for his help.

I took some ideas from SWM and Blake. The carcass is birch plywood and 2×3’s. I did torsion the top so the table top wood stay flat. I had some mahogany laying around that my Dad had given me some twenty years ago. It looks like there might have been two different kinds. So I used that for the face frame, drawer fronts, and the door casings.

I used SWM idea of smaller casters at one end, along with the heavy duty toggles to level it. What a great idea.

I installed the INCRA Mast-R-Lift II Router Lift. The 17” LS positioner I already had.

Anyway, it was a fun project and I use the router a lot.

Pat

-- dragondncr





7 comments so far

View beginner1's profile

beginner1

72 posts in 1530 days


#1 posted 07-25-2011 02:30 AM

nice table. beautiful work.

-- Gerald, Illinois

View SWM's profile

SWM

93 posts in 2030 days


#2 posted 07-25-2011 06:19 AM

Glad that I could help! That is a fine router table that will serve you well for years to come. The massive size and insane accuracy doesn’t hurt either!

-- Working on a retirement hobby, only 30 more years to practice!

View longgone's profile

longgone

5688 posts in 2281 days


#3 posted 07-25-2011 07:30 PM

Great job on your router table. You cannot get better than Incra. I have the same Incra setup and it is great. I only wish i would have purchased their largest top. I still might buy it anf fit to my table. I have had numerous times when a larger top would be of benefit.

View dragondncr's profile

dragondncr

38 posts in 2402 days


#4 posted 07-26-2011 02:50 AM

Thanks for the great comments. It is really nice to have the storage for all the router related items.

-- dragondncr

View ShopTinker's profile

ShopTinker

881 posts in 1741 days


#5 posted 07-26-2011 01:46 PM

Very nice cabinet. Could you post pictures with the doors and a couple of drawers open?

-- Dan - Valparaiso, Indiana, "A smart man changes his mind, a fool never does."

View dragondncr's profile

dragondncr

38 posts in 2402 days


#6 posted 07-28-2011 01:02 AM

I added photos of drawers and doors open as requested.

-- dragondncr

View timbertailor's profile

timbertailor

1513 posts in 396 days


#7 posted 07-02-2014 11:43 PM

I just found some time to build a table for my setup and I really liked your approach. It looks great.

-- Brad, Texas, https://www.youtube.com/user/tonkatoytruck/feed

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com