LumberJocks

Bullet Coat Rack

  • Advertise with us
Project by Joe posted 1107 days ago 2135 views 1 time favorited 4 comments Add to Favorites Watch

I was asked to design and build a coat rack around 50 Cal and 7.62 spent brass casings as the hooks. It was built for a shipmate that is transferring. It’s made from white oak and I inlayed a little wenge. Holes were drilled so the challenge coins would sit flush. The bullet holes are drilled at 20 degree and gorilla glue was used to hold them in place.

-- Senior Chief





4 comments so far

View Dan Hux's profile

Dan Hux

576 posts in 1978 days


#1 posted 1107 days ago

very nice work…

-- Dan Hux,,,,Raleigh, NC http://whitdaniel.com

View degoose's profile

degoose

6980 posts in 1958 days


#2 posted 1107 days ago

Bravo Zulu Senior Chief….

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...

View Jim Jakosh's profile

Jim Jakosh

11099 posts in 1709 days


#3 posted 1106 days ago

Very cool. I like using casings too!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View woodman1962's profile

woodman1962

150 posts in 1292 days


#4 posted 1106 days ago

Nice looking design it turned out real nice.And thanks for your service from a former navy guy.

-- jjhollyawc@yahoo.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase