|Project by RJones||posted 07-15-2011 01:07 AM||1835 views||0 times favorited||7 comments|
It’s rare but every once in again I get a couple extra minutes in the shop to goof off and today was the day to try inlaying some copper. I have been wanting to do this for a awhile now but. Anyways this was more of a test than anything but cool to say the least. Now while I have done inlay by hand this time I opted the use of the CNC. The pic shows some 0.02” copper inlayed into a piece of Bubinga with a coat of Permalac to seal the copper and couple coats of satin lacquer to seal the wood. Nothing special really just thought I would share.