LumberJocks

Frame From Oak, Walnut and Poplar

  • Advertise with us
Project by AaronSKuehn posted 06-30-2011 09:47 PM 718 views 3 times favorited 3 comments Add to Favorites Watch

Frame From Oak, Walnut and Poplar

-- Aaron





3 comments so far

View ChesapeakeBob's profile

ChesapeakeBob

365 posts in 2943 days


#1 posted 06-30-2011 09:57 PM

Good looking frame! Any tricks that you care to share with us about the glue-up?

CB

-- Chesapeake Bob, Southern Maryland

View AaronSKuehn's profile

AaronSKuehn

327 posts in 1983 days


#2 posted 07-01-2011 04:51 AM

@ChesapeakeBob: I tried something new on this glue-up and I’m very pleased with it. I ran each of the three types of wood through the tablesaw to get them fairly uniform. Then I glued them and tacked each end of each glue-up with a brad nailer. Then I clamped. After the glue was dry I chopped a few inches off each end to get rid of the pin and then ran them through the tablesaw again just skim off the squeeze-out.

-- Aaron

View wookie's profile

wookie

154 posts in 2544 days


#3 posted 11-03-2011 02:09 AM

Aaron, cool frame and cool glue up procedure. I will definitely remember that one.

Cheers, Jack.

-- Wookie=Wood Rookie

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com