| Project by WoodenDuckColorado | posted 1002 days ago | 810 views | 1 time favorited | 2 comments |  |
 |
Got a chunk of Mahogany from a friend that works in a custom door manufacturer. It was only about 12” x 8” x 2 3/8”. I decided to use my oblong template from a previous project that was about the same size of the blank and this was the result after clearing out the inside, sanding and applying a couple coats of clear poly.
-- Recycle, Repurpose, Restore
| Pin It |
2 comments so far
Pete Santos
home | projects | blog
162 posts in 2471 days
#1 posted 1001 days ago
Mahogany is my FAVORITE wood to work with, however I have very many many close contenders. I think I’ll endeavor to do something similar, only change I would make is to have the walls a bit thicker.
-- Greatness is not found in possessions, power, position, or prestige. It is discovered in goodness, humility, service, and love.
WoodenDuckColorado
home | projects | blog
41 posts in 1025 days
#2 posted 1001 days ago
This is the first time working with Mahogany, and it ranks high on my list too. The walls are just under 1/2” thick with the size of the template and the size of the blank I didn’t have too much room to work with.
-- Recycle, Repurpose, Restore
Have your say...