Spalted red gum & spalted sycamore table and chairs

  • Advertise with us
Project by Ricksfaith posted 1165 days ago 1397 views 1 time favorited 3 comments Add to Favorites Watch

This is my first attempt at chairs to go along with the table that I made. The chairs and table are made from spalted quarter-sawn american red gum (satin walnut) and sycamore (lace wood). The chair frames are of red gum with the seat & back of spalted sycamore. The table top is book-matched sycamore with red gum accents, mainly the breadboard, tie beam and feet of red gum. The pins are made of holly. The spalted sycamore started out as a quarter-sawn slab that was 23 1/2” wide x 4 1/2” thick x 7 feet in length. We cut the slab to make the book-match for the top and the remainder was used for the accents in the chairs. The table measures 38” wide x 85”in length x 1 3/4” in thickness.

3 comments so far

View Bertha's profile


12951 posts in 1318 days

#1 posted 1165 days ago

Insanely beautiful.

-- My dad and I built a 65 chev pick up.I killed trannys in that thing for some reason-Hog

View sras's profile


3813 posts in 1754 days

#2 posted 1165 days ago

Making chairs is a big challenge. Looks like you have met that challenge with a fantastic result. Well done!

-- Steve - Impatience is Expensive

View lumberjoe's profile


2829 posts in 873 days

#3 posted 859 days ago

This is exactly what I hope to accomplish one day, and that is a huge compliment because I have extremely high, almost unattainable standards.


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase