|Project by herbr||posted 02-03-2008 04:52 PM||1127 views||4 times favorited||4 comments|
This gift was made of pine. The plan for this rattle was mostly self-designed. I cut the circular ends and middle piece out on my router table. The outside cage pieces were made from 3/8 ” dowels. I drilled 7/16 ” holes half-way through the end pieces and completly through the middle piece. The blocks were cut from 2×4 scraps. I finished the project with non-toxic water paints and covered with non-toxic butcher block finish.
-- Spread love with our work