| Project by Dan Pleska | posted 710 days ago | 1055 views | 4 times favorited | 5 comments |  |
 |
This is one of four stools I made for a client. Made of oak, the seat is 9 1/2” x 17 1/2” and 33” tall. Most bar stools are 29” tall, but the clients bar is taller than normal.
-- Dan, West Virginia, http://www.danpleskaCreations.com
| Pin It |
5 comments so far
jack1
home | projects | blog
1803 posts in 2194 days
#1 posted 710 days ago
Nice lines. How did you carve out the seat?
-- jack -- ...measure once, curse twice!
Dan Pleska
home | projects | blog
135 posts in 2127 days
#2 posted 710 days ago
Hi jack,
I cut most of the seat out with the bandsaw, then sanded with my random orbital sander from 60 to 150 grit.
-- Dan, West Virginia, http://www.danpleskaCreations.com
reggiek
home | projects | blog
2238 posts in 1437 days
#3 posted 710 days ago
Great project…..I believe I saw something similar in one of my recent magazines….I was thinking about making something like this to use at my drafting table (except I want something that swivels)......I like the lines of this one….and the carved seat…Although, I am not a big fan of oak (probably because it is so prevalent in my area)...You did an excellent job.
-- Woodworking.....My small slice of heaven!
jack1
home | projects | blog
1803 posts in 2194 days
#4 posted 710 days ago
YOu did a great job.
-- jack -- ...measure once, curse twice!
DocK16
home | projects | blog
1124 posts in 2253 days
#5 posted 707 days ago
That seat looks wide enough to fit even my big tush Great design and nice work
-- DocK, WV
Have your say...