Modified Simple Lift Lid Box

  • Advertise with us
Project by Dan posted 05-30-2011 08:24 PM 1934 views 1 time favorited 5 comments Add to Favorites Watch

I made this box for my girlfriend to test out a miter spline jig I made.

This is a modified version of Doug Stowe’s Lift Lid Box. The sides are an inch and a half wider than the plans. Its made with some red oak and some scrap I had for the top. I’m not really sure what it is. The finish is the tried and true shellac with a little wax.

I’m on my way to making some real boxes. I need to do a little more work on my miter sled. Something is off.

-- Will work for wood...

5 comments so far

View mtkate's profile


2049 posts in 3347 days

#1 posted 05-31-2011 12:27 AM

The box looks good from here….

View Ken90712's profile


17563 posts in 3211 days

#2 posted 05-31-2011 12:28 AM

Well done!

-- Ken, "Everyday above ground is a good day!"

View bigike's profile


4052 posts in 3311 days

#3 posted 05-31-2011 02:02 AM

great job very nice work.

-- Ike, Big Daddies Woodshop,

View smitty22's profile


714 posts in 2969 days

#4 posted 05-31-2011 03:59 AM

Dan, the box looks really great. If the sled created a problem, it’s sure not evident!
thanks for posting the project.

-- Smitty

View Dan's profile


106 posts in 2848 days

#5 posted 05-31-2011 03:20 PM

Thank you. 3 miters line up perfectly and the last one is just a bit shallow. I might have had the piece off a bit in the sled. I need to add some type of clamp to hold things in place. I might just make a new one that has hold down tracks and all. The miter spline sled works well though.

-- Will work for wood...

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics