|Project by SASmith||posted 05-17-2011 01:58 AM||1510 views||2 times favorited||4 comments|
Here are 2 13” walnut and sassafras bowls.
The blank was made by stacking a sassafras blank on top of a walnut blank and cutting one of the curves on the bandsaw. Then the 2 blanks were unstacked and 1/2 the top blank switched with 1/2 the bottom blank and re-glued. I continued this process of cutting and gluing all around the blank.
Once I had the spiral “cutting board” blank I then cut rings using the process described here:
-- Scott Smith, Southern Illinois