| Project by emetric | posted 756 days ago | 2090 views | 3 times favorited | 4 comments |  |
 |
This is my new outfeed table. It isn’t very impressive but I didn’t have to buy anything to make it, I only used what I already had (or re-purposed). I also built in some clamp storage on both sides for my smaller clamps. The second picture shows how I used dowels on the legson the left side of the outfeed table to store my spring clamps. Enjoy.
-- "One often meets his destiny on the road he takes to avoid it." Master Oogway
| Pin It |
4 comments so far
devann
home | projects | blog
1718 posts in 859 days
#1 posted 756 days ago
Terrific looking table. Looks like you left youself a place to add a flip up portion so that the table can be expanded for longer stock coming off the tablesaw. I made one for my TS recently. Did the same thing used what I had, low $$. I think yours is better looking than mine. I like the clamp idea.
-- Darrell, making more sawdust than I know what to do with
Jim Jakosh
home | projects | blog
7246 posts in 1272 days
#2 posted 756 days ago
That is sure a handy addition to the shop. Thanks for sharing!!
I love recycling!
-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!!
GaryD
home | projects | blog
608 posts in 1536 days
#3 posted 755 days ago
Nicely done!
-- Gary, Little River,SC I've Learned that the Lord didn't do it all in one day and neither can I
steliart
home | projects | blog
1286 posts in 855 days
#4 posted 754 days ago
cool table
-- I am not so rich to buy cheap tools.
Have your say...