Work Table

  • Advertise with us
Project by Victor708 posted 04-20-2011 03:30 AM 3816 views 18 times favorited 14 comments Add to Favorites Watch

Finally finished the worktable I started building when I lost the battle(and fingertip) with my jointer. One thing I did learn from all that, is that if its thicker than “Air”, you will bang your finger into it…..
The design was from Marc Spagnolo. Made from birch ply, mdf, and red oak. And yes my shop is a mess. In the process of setting it up so lots to be done.


-- "If a man is alone in the forrest with no woman to hear him. Is he still Wrong?"

14 comments so far

View rance's profile


4154 posts in 2007 days

#1 posted 04-20-2011 03:57 AM

Looks VERY useful Vic. I like the replacable top too. Your shop is not so messy you can’t get something accomplished. You got that great table built. :)

-- Backer boards, stop blocks, build oversized, and never buy a hand plane--

View Pacdad's profile


14 posts in 1765 days

#2 posted 04-20-2011 04:36 AM

Nice table!! Looks like a torsion box top. Is that an air line I see hanging on the end? Nice idea to include in table.

View Lockwatcher's profile


85 posts in 1539 days

#3 posted 04-20-2011 05:31 AM

Great table…check out all that storage. Your top looks similar to the top for my assembly table…from the March 2010 Wood Magazine project…

Assembly Table

-- Lockwatcher, Ohio,

View a1Jim's profile


113161 posts in 2424 days

#4 posted 04-20-2011 05:46 AM

Very nice work table.

-- Custom furniture

View 308Gap's profile


332 posts in 1850 days

#5 posted 04-20-2011 06:00 AM

Looks good sir….......what mess?

-- Thank You Veterans!

View Billp's profile


784 posts in 3046 days

#6 posted 04-20-2011 06:14 AM

Looks great I built the same one. Victor how did you like lifting the top on?

-- Billp

View Splinterman's profile


23057 posts in 2208 days

#7 posted 04-20-2011 09:51 AM

Now that is a nice designed and well finished table…good job.

View Ken90712's profile


15407 posts in 2035 days

#8 posted 04-20-2011 10:38 AM

Nice work, Hope your healing up ok as well. That is one beast you have built.

-- Ken, "Everyday above ground is a good day!"

View Victor708's profile


44 posts in 2160 days

#9 posted 04-20-2011 02:03 PM

Thanks all,

Pacdad – yes that is an air hose. I had a small pancake type air compressor that wasn’t being used so I insalled it in the cabnet.
Billp – The torsion top is a beast, much heaver than I expected. I was able to recruit one of the neighbors to help me set it in place. Luckily, it was already laying on top of my old workbench so aLL we had to do is lift and move sideways.
Ken – finger is healing nicely, still a little ways to go but almost there.


-- "If a man is alone in the forrest with no woman to hear him. Is he still Wrong?"

View MShort's profile


1744 posts in 2265 days

#10 posted 04-20-2011 04:13 PM

Great looking work table.

-- Mike, Missouri --- “A positive life can not happen with a negative mind.” ---

View steliart's profile


1816 posts in 1535 days

#11 posted 04-20-2011 05:00 PM

thats anice table
well done

-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions - --

View Dennisgrosen's profile


10850 posts in 1962 days

#12 posted 04-20-2011 09:20 PM

nice Marc. table :-)
and a very niice site your labtop show ….lol

thank´s for sharing it , now lets see some project´s fly from it


View dubsaloon's profile


619 posts in 1640 days

#13 posted 04-27-2011 07:33 AM

Nice! No wasted space on that unit.

-- The works of evil people are not the problem. It is the "Good" people standing by and watching not speaking up. Dubsaloon

View Beginningwoodworker's profile


13347 posts in 2519 days

#14 posted 04-28-2011 10:50 PM

Great work table.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics