• Advertise with us
Project by . posted 04-18-2011 07:40 AM 3700 views 26 times favorited 4 comments Add to Favorites Watch
. No picture No picture No picture No picture No picture
Zoom Pictures


4 comments so far

View Dennisgrosen's profile


10880 posts in 3114 days

#1 posted 04-18-2011 10:30 AM

some good idea´s and thought´s behind the combi shootingboard
looking foward to hear more about how it works for you and what you might want to change
after you have used it for a while

thank´s for sharing


View TopamaxSurvivor's profile


18271 posts in 3675 days

#2 posted 04-18-2011 10:43 AM

Nice job on these!!

-- Bob in WW ~ "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View abie's profile


874 posts in 3770 days

#3 posted 04-18-2011 05:30 PM

Nice Work
love your posts..
How did you cut the angled 45 degree slots?
That in itself would be a nice post
PS love your Incra jig post
I will attempt this at a later date,

-- Bruce. a mind is like a book it is only useful when open.

View .'s profile


76 posts in 3796 days

#4 posted 04-19-2011 07:21 AM

Hi Bruce, thanks for the kind words. The slots on the jig were cut with a simple trammel I created. I bought the stock for it, a sheet of acrylic, at Lowes.

I first drilled through the fence and platform together for the alignment of the starting (and ending) holes for the routing. I then used my trim router and a spiral upcut bit to rout out the channels. Successive passes made it easy on the bit and smooth.

I then replaced the bit with a v-groove bit and made 3 or 4 passes on each side for the curved cuts. For the pivot point in the corner I simply rotated the trammel 180 degrees, using one of the grooves as the indexing pin placement for the trammel and plunged down into the corner hole to create a 45 degree bevel.

Hope that make sense.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics