| Project by grosa | posted 771 days ago | 1374 views | 10 times favorited | 7 comments |  |
 |
This set of cabinet doors was made out of MDF. I made 2 templates on my inverted pin router. Four door designs are the same ( the 4 on the outside) and the 2 middle ones are the same. I plowed out the back to accept the 1/4” plexiglass bubble panels. The last picture shows the doors from the back. Each blue plexi shape was cut out on the scroll saw individually. The plexi ( 3 FORM ) is flat on one side and a bubble texture on the face side.The first picture shows the doors face, Primed and painted white. On the 24th of this month we will be going to Key West to install this project, I will post the 6th picture of the finished product. This project was fun to build and it was done with out a CNC. This was for a hotel in Key West.
-- Have a great day.
| Pin It |
7 comments so far
Cozmo35
home | projects | blog
2138 posts in 1207 days
#1 posted 771 days ago
Great job and clean cuts.
-- If you don't work, you don't eat!.....Garland, TX
BillyJ
home | projects | blog
622 posts in 1374 days
#2 posted 771 days ago
I like the design. Very nice work – as usual. Can’t wait to see the finished product installed.
-- I've never seen a tree that I wouldn't like to repurpose into a project. I love the smell of wood in the morning - it smells like victory.
patron
home | projects | blog
12067 posts in 1512 days
#3 posted 771 days ago
nice work
and you have a good answer
for that nagging question
‘what did you ever do
before CNC machines came along’
-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle
a1Jim
home | projects | blog
87268 posts in 1748 days
#4 posted 771 days ago
Cool design
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
hightide
home | projects | blog
10 posts in 861 days
#5 posted 770 days ago
Looks great! Would love to see them installed.
-- .: HH :. Daniel Island SC - www.plankinmyowneye.com
grosa
home | projects | blog
849 posts in 1000 days
#6 posted 749 days ago
The last picture is what they look like installed. This was a Studio B design. I just made what he designed.
-- Have a great day.
grosa
home | projects | blog
849 posts in 1000 days
#7 posted 538 days ago
Patron, this wasn’t made with a CNC. It was made with a scrollsaw and an inverted pin router. I don’t use CNC’s.
-- Have a great day.
Have your say...