or Join Now!
Made from a block of walnut, inlay initial using Inlace.
home | projects | blog
30 posts in 1975 days
Preview this project card
1419 posts in 2422 days
#1 posted 04-11-2011 04:44 PM
Nice little ring box, I like the two ring style, the walnut is beautiful, thanks for sharing
-- It's Mic Keep working and sharing
788 posts in 2112 days
#2 posted 04-11-2011 06:18 PM
What a nice box :)
21807 posts in 2170 days
#3 posted 04-11-2011 07:02 PM
-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau
98 posts in 2337 days
#4 posted 04-12-2011 01:46 PM
Nice Ring Box how did you do the hinge on the box? I am interested in how you did the inlays also. I’m working on inlays presently and I’m always looking for tips and tricks to do the job. Thanks for sharing.
-- ~ Guy Woodward, Pflugerville Texas
#5 posted 04-12-2011 03:36 PM
the hinges are quite simple. I git mine at Woodcraft. Just cut a small chamfer in the back of the base and the lid, that will serve as a stop. The initials were routed with a drememl using a 3/32 bit attached to a router base, bit and base were both obtained at Stewart-McDonald. The inlay material is an epoxy type product called Inlace and is very easy to work with.
Miniature Barrel HingesItem #06R91 $8.49
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics