LumberJocks

Easy Shop Table III

  • Advertise with us
Project by Lockwatcher posted 1107 days ago 4350 views 34 times favorited 4 comments Add to Favorites Watch

I just finsihed building my last (?) shop table (at least for a little while).

This table was built using re-dimensioned construction lumber from the big box store. Price for building the table was only about $24 (without casters). The casters were expensive, as they both lock the wheel and the pivot point. This makes the table very stable.

As you can see, I built this one for my new Dewalt Planer.

The complete blog with instructions can be found here: Easy Shop Table

Hope you like it!

Ken C.

-- Lockwatcher, Ohio, http://www.lockwatcher.com/





4 comments so far

View auggy53's profile

auggy53

159 posts in 1180 days


#1 posted 1107 days ago

nice table , that should be my next project

-- rick

View workerinwood's profile

workerinwood

2673 posts in 1568 days


#2 posted 1106 days ago

Nice job!!

-- Jack, Albuquerque

View RexMcKinnon's profile

RexMcKinnon

2593 posts in 1696 days


#3 posted 1106 days ago

Nice, looks very sturdy. Should have no problem holding your planer.

-- If all you have is a hammer, everything looks like a nail!

View Mauricio's profile

Mauricio

6693 posts in 1652 days


#4 posted 193 days ago

Thats it, I’m going to make some of these.

-- Mauricio - Woodstock, GA - "Confusion is the Womb of Learning, with utter conviction being it's Tomb" Prof. T.O. Nitsch

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase