or Join Now!
Small maple hollow form with carved feet. It measures approximately 5 inches by 5 inches. All comments and critiques are welcomed and appreciated.
-- My favorite piece is my last one, my best piece is my next one.
home | projects | blog
8135 posts in 3097 days
Preview this project card
2240 posts in 2600 days
#1 posted 03-31-2011 12:40 AM
Another beauty Joe. I like the feet idea – was that due to unbalance or a planned addition? I have had a few vessels that got a little top heavy….a few so much that I had to make a stand of some sort….I have seen some folks turning and adding additional pieces to their turnings.
The wood grain is spectacular…the sapwood looks like a reflection of light to the camera. There really is a lot going on in there with those swirls and color changes….I like the finish…the satin finish was the way to go…too much gloss would have made it look too busy.
-- Woodworking.....My small slice of heaven!
10635 posts in 3576 days
#2 posted 03-31-2011 12:48 AM
Very nice hollow form Joe. Lots of nice grain and character.
-- (You just have to please the man in the Mirror) Mike from Michigan -
2388 posts in 2775 days
#3 posted 03-31-2011 12:54 AM
Great piece. Beautiful wood & great form.
572 posts in 2455 days
#4 posted 03-31-2011 01:50 AM
Love the look, Joe. The spalting sure looks nice and makes it unique.Great!
-- Marty, https://www.MyChipCarving.com, 866-444-6996
2710 posts in 2928 days
#5 posted 03-31-2011 03:09 AM
Another great piece!!
Thanks for sharing
-- Chuck Emery, Michigan,
203 posts in 3372 days
#6 posted 03-31-2011 03:20 AM
Nice as always. If possible I would like to see some of the detail on the foot. Could you post a picture of that?Thanks,Al
-- Al Holstein "I wood do it"
#7 posted 03-31-2011 04:45 AM
Thanks for all the comments. The feet were planned.
3655 posts in 3052 days
#8 posted 03-31-2011 06:59 AM
Beautifully turned and I especially like the feet.
-- "They who dream by day are cognizant of many things which escape those who dream only by night." ~ Edgar Allan Poe
1779 posts in 2791 days
#9 posted 03-31-2011 01:26 PM
Nice work as always…..... Love the feet! I would love to be able to look over your shoulder as you turn these things and see what tools you are using and how. I just can’t decide based on catalog pictures which hollow form turning chisels to get, they’re expensive enough and my budget small enough that I can’t just buy something and try it. Keep ‘em commin’.
-- Dr. Ken, Florida - Durch harte arbeit werden Träume wahr.
2049 posts in 2655 days
#10 posted 03-31-2011 01:29 PM
19359 posts in 2134 days
#11 posted 03-31-2011 03:22 PM
nothin but, beeee u teee ful!ya gotta luv Maplevery nice
-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com
1326 posts in 2660 days
#12 posted 04-01-2011 03:59 AM
Looks like a different pot from each side…. I like the concentric circles.
-- I just got done cutting three boards and all four of them were too short. (true story)
#13 posted 04-01-2011 05:12 AM
Thanks for all the kind remarks.
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics