cedar lamps turned on lathe

  • Advertise with us
Project by aarons50 posted 1246 days ago 1913 views 0 times favorited 4 comments Add to Favorites Watch

Turned from a cedar tree cut down at my brothers place

-- Aaron

4 comments so far

View Moby's profile


64 posts in 1386 days

#1 posted 1246 days ago

Very nice! I’ve been wanting to make a lamp on my lathe lately.

View Leon's profile


15 posts in 1282 days

#2 posted 1245 days ago

This is beautiful!

View Mike R.'s profile

Mike R.

177 posts in 1272 days

#3 posted 1244 days ago

what did you use for a finish ? i am thinking of doing one also. what about hardware? where did you pick up the hardware ?

View aarons50's profile


10 posts in 1249 days

#4 posted 1244 days ago

I used a couple coats of minwax sealer and several coats of rub on poly. I used 00 steel wool between each coat
I hear you dont need sealer with rub on poly but it really takes a lot less poly and saves a lot of time. just my thoughts on it..Oh you can buy the hardware kits at any hardware store. I actually bought these at wal mart but I dont think I would again. Not the best quality in my opinion.

-- Aaron

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase