LumberJocks

Out-feed / Assembly Table

  • Advertise with us
Project by Vick posted 1247 days ago 1660 views 7 times favorited 5 comments Add to Favorites Watch

Whenever I go to the local home improvement center, I always check the scraps ben. All of the dimensional lumber for this project was bought for $.50 a stick. My wife doesn’t really get the concept of not moving from side to side when catching lumber so I used to dread having to ask her. One day it dawned on me that I had enough lumber laying around to do something about it. At first, I was going to stop at just the table but I quickly realized that I had some prime real estate for storage. The peg board is the best part of the table. Also, you can’t really see it, but on the right end of the peg board (in the gap between the table and the saw) I made a lip to store the miter fence when not in use. The top is 3/4in maple plywood, edged in maple, and finished with 5 coats of shellac, The only materials I had to buy to complete the project were the lag screws and an assortment of pegs for the board.

-- Good energy perpetuates good energy!





5 comments so far

View devann's profile

devann

1735 posts in 1316 days


#1 posted 1247 days ago

Hi Vick, Nice job on your outfeed table. That’s some good use of space and available materials. I made myself one for my tablesaw about a week ago. Like you I didn’t spend $20 on it, used what I had. I didn’t get any storage space under mine, made it a fixed/folding setup.

-- Darrell, making more sawdust than I know what to do with

View Moron's profile

Moron

4666 posts in 2517 days


#2 posted 1247 days ago

I dont have the luxury of an outfield table right now

and loving it : )

-- "Good artists borrow, great artists steal”…..Picasso

View RexMcKinnon's profile

RexMcKinnon

2593 posts in 1819 days


#3 posted 1246 days ago

Looks very useful. I know what you mean about the wife not holding things strait. I always setup roller stands but they are just not very good in certain situations.

-- If all you have is a hammer, everything looks like a nail!

View Brrman's profile

Brrman

59 posts in 1296 days


#4 posted 1246 days ago

Looks great. If only I could get out from under the Honey-Do list to make an outfeed table…

-- "Being a perfectionist does not make one perfect..."

View Woodwrecker's profile

Woodwrecker

3580 posts in 2199 days


#5 posted 1246 days ago

If I had that space in front of my saw, that’s just the kind of out feed table I’d make.
Very nice job.

-- Having fun...Eric

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase