or Join Now!
Maple ply and trim Aquarium stand built in my tiny garage a few years ago. I found these nifty knobs at Lowes.
-- Measure Twice, cut two, three times, plane, join, sand, coat, sand, coat, sand, coat, buff, wax, polish, brag. It's a process.
home | projects | blog
52 posts in 2058 days
Preview this project card
1335 posts in 1961 days
#1 posted 03-21-2011 01:52 PM
I need one of these, thanks for the inspiration.
-- Kelly, woodworker under construction
42 posts in 1932 days
#2 posted 03-21-2011 01:52 PM
271 posts in 1959 days
#3 posted 03-21-2011 03:45 PM
Very nice – the decorative pulls are a great touch!
-- - Cindy, texture freak -
2593 posts in 2468 days
#4 posted 03-21-2011 05:00 PM
Really nice, would be nice to have a picture with the fish inside.
-- If all you have is a hammer, everything looks like a nail!
16579 posts in 2462 days
#5 posted 03-25-2011 02:00 PM
Miss my 55….. Nice job might have to get another one soon.
-- Ken, "Everyday above ground is a good day!"
2 posts in 1886 days
#6 posted 04-18-2011 09:12 PM
Looks great, can you tell meWhat thickness ply you used? I am planning to build something similar.
#7 posted 04-19-2011 01:35 AM
3/4” cabinet grade ply that runs all the way from the floor to the inside edges of bottom of the aquarium with the trim around so none of the load goes onto any of the joints or on the trim, but instead straight down the length of the ply. 55 gallon aquarium weighs between 400-500 lbs depending on live rock and whatnot.
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics